Decoration diary - selection of lamps

Lamps are our daily home decoration in the finishing touch, so the choice of lamps is very important, in the selection of lamps need to grasp the height of the space, lamps and lanterns are equipped with, aluminum extrusion cnc turn on the light frequency of the three major focuses.

Measure the height of the ground from the ceiling

The main light is divided into three types, ceiling lamps, chandeliers, semi-pendant lamps, and according to the direction of the light source irradiation can be divided into downlighting and uplighting, uplighting because the light to the top, so the light source is more soft, and downlighting, the light downlighting, the light source is very bright and direct. The choice of which lights, in addition to personal preference, it is best to consider the height of the ceiling and the use of space, in order not to create a sense of pressure on the space.

To understand the configuration of each space lamps

(1) living room: whether it is a ceiling lamp, chandelier or semi-chandelier, should be the highest person at home, the hand stretches straight to touch the distance, for the lowest height of the selected lamp. If you can not measure on the ground, the distance between the ground and the ceiling for the purchase of standards. If the distance is more than 3M extrusion profiles can buy chandeliers, 2.7 ~ 3M between, you can choose semi-pendant; 2.7M below can only choose ceiling lights.

(2) Dining room: people generally like to use chandeliers in the dining room, but not all restaurants can use chandeliers, the location of the restaurant must be fixed. Now a lot of small area space, in order to make full use of space, the dining room are shared with the living room or other space, use, before moving out of the dining table. Like this restaurant is very unsuitable for the use of chandeliers, can only choose semi-pendant lamps and ceiling lamps, in order not to affect people's actions, and the height of the chandelier from the desktop, it must be controlled in the 70 ~ 80CM.

(3) Bedroom: It is recommended that the use of ceiling lamps or semi-pendant lamps, because the bed has a height, even if people lie in bed, the lamp is too low or a sense of oppression, it is best not to use chandeliers.

(4) Bathroom and kitchen: most of the ceiling, it is best to v slot extrusion use ceiling lamps. Or directly choose to support the use of integrated ceiling plate lamps.

Be clear about the space where the lights are most often switched on

The electricity cost saved by LED is 85% of that of incandescent lamps. To save electricity, it is best to choose power-saving bulbs or LED bulbs. Like the living room or bedroom lights, are turned on for a long time space, depending on the circumstances of the choice of power-saving bulbs or LED bulbs, can save a lot of money.


Related Hot Topic

Can you laser cut 6061 aluminum?

Cutting Capabilities for AluminumOhio As long as the protective plastic layer is rated for fiber la er and adheres firmly, the laer can process the e aluminum grade with or without it. All tempers of aluminum alloy 3003, 5052, 6061, 6063, and 7075 are used in manufacturing.

Top