2024 High-performance pcb board china

100 mm W x 80 mm L x 1/16" T Busboard ST2. Traditional Stripboard Pattern Prototyping Circuit Board

Price: $6.00

Tracks travel the length of the board in the typical stripboard arrangement.

High-quality Fr4 glass-epoxy circuit board, single-sided 100 mm x 80 mm and 1/16 inch in size China is the source nation.

15 pieces of the Type-C USB 5V 1A TP4056 Charging Module 18650 Lithium Battery Charger Board with Protection

Price: $10.99

5V input voltage, 1A maximum output current, and 4.2V 1% charging cut-off voltage; input spec: USB Type-C Red indicates charging while Green indicates complete charge.

Application: It has USB ports that can be used to power single-cell lithium ion batteries or multi-section paralleled lithium ion batteries.

The module with a USB port can be used as a phone charger while still retaining voltage input wiring pads, making it convenient for DIY projects.

Note: Please double-check all connections before charging; if the load OUT terminal is connected to the positive and negative poles in the incorrect order, it will get damaged.

Installation instructions are not supplied.

If this is your first time performing this task, we advise you to...

BOJACK 37 Qualities With a precision potentiometer, jumper wire, 480 pieces of electronic components, and an 830 tie-point breadboard, this fun kit includes 480 electronic components. Compliant with Arduino, Raspberry Pi, and STM32

Price: $16.99

Contains over 400 components to enable you complete easy and engaging electrical experiments, making it a comprehensive and useful kit.

Sturdy and transparent packaging: All parts are sorted, packed, and arranged in a clear box with labeling that make it easy to discover parts.

Humanized design: A power module and a USB data cable are included in the packaging, and the parts can be connected to the breadboard straight, saving soldering time and hassle.

The component quality is consistent.

Compliant with Arduino, Raspberry Pi, STM32, and other platforms.

Flexible arms for a soldering station, PCB circuit board holder with three LED magnifying lamps, 360 hot air gun holder, extra large and heavy duty base plate, and magnetic helping hands for soldering third hands

Price: $89.95

The large 11.4" x 7.1" powder-coated steel base weighs over 3.3 pounds and is incredibly strong, ensuring that your workstation won't tip over or move an inch.

This is an upgrade from the standard heavy duty powder-coated metal base.

Stability and scratch and scuff resistance for your worktop are provided by the base's rubber feet.

【4 Metal Arms with Magnetic Bases】Strong magnetic positioning allows four metal gooseneck arms to be adjusted to fit any project size.

The arms are attached to the base.

Raise your hands to the fullest and work more effortlessly than ever.

【Hot Air Gun Frame with 360 Degree Rotation】 Its powerful magnetic foundation allows it to be attached to any metal object.

It is simple to operate.

The clamp section can have its width modified to suit the needs of the task, and the bracket part has 360-degree rotation capability.

It works well as a DIY assistant.

Strong magnets allow for easy movement of the four pillar holders.

firmly embedded earth magnet.

On a sturdy steel foundation, magnetic arms can be positioned anywhere.

【What You Get】 Completely satisfied, guaranteed.

Our caring customer service and hassle-free 36-month warranty.

PCB Circuit Board, uxcell Double-Sided Copper Clad Laminate, FR4 150x100mm 5.91x3.94 inch, 1.5 mm Thickness 15 pieces of DIY prototyping PCB board, name board

Price: $22.49

【Material】 Copper, FR-4 glass fiber; double-sided layers.

Dimensions: 150x100mm / 5.91x3.94 inch (L*W); approximate thickness: 1.5 mm.

Great for creating PCB circuit board models, among other applications.

frequently used in production, maintenance, DIY projects, and product development.

Stable: Electrostatic tracks, pads, and other features etched from copper sheets laminated onto a non-conductive substrate are used to mechanically support and electrically connect electronic components.

It is necessary to use fine sandpaper to smooth out the oxide layer on the copper-clad laminate surface in order to make sure that the carbon powder can be firmly printed on the laminate during transfer.

The board's surface ought to be flawless and free of any noticeable stains.

14-length assorted preformed breadboard jumper wire in an AUSTOR 560 piece jumper wire kit with a free box

Price: $13.99

AWG, U-shaped, male to male, 24 mm, wire length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm Many uses: ideal for breadboard projects, this design functions well with any type of breadboard or anywhere jumper wires are required.

Simple to use: all of the colored jumper wire is readily stripped and pre-formed at an angle, making it simple to connect it to a breadboard.

Bonus item: comes with a free plastic box to keep your jumper wire kit organized and easily stored and retrieved.

Please take note that the breadboard wire is slightly pliable, allowing for easy shape changes during the connect test.

If you experience difficulties inserting the wire, make sure the cable in the breadboard's pin hole is in good condition.

Kaisiking 4 Piece Large Silicone Repair Mat Set for Placing Screws with Anti-Static Wrist and Two Tweezers Size 21.6 x 13.8 Inch Computer Repair Mat for Soldering, Electronics Repair

The maintenance platform is kept clean and organized thanks to the "Multi-Function" Silicone work mat's built-in scale ruler (0 38 cm/0 15 in), 124 screw positions, 3 pcs of magnetic parts regions, and 18 notches to classify precise parts.

Heat insulation mats can withstand temperatures of up to 500°C and are also anti-corrosive.

Because of their soft texture, they can support high temperature soldering tasks directly, protecting maintenance platforms from harm.

Anti-SlipBy adopting an anti-slip design on both the surface and the back, this item won't slide about on your counter or station.

Its appealing design also prevents small parts from sliding, preventing their loss or misplacing.

Magnetic repair mats have a wide range of applications, making them perfect for soldering electronics assembly or electronics and...

5 in 1 DIY Kits: Yidab Soldering Practice Kit SMD SMT Electronics Projects with a Small USA Flag Welding Skills for Soldering Kits Discover Soldering Kit for Novices (03XGQ5-1)

Price: $29.99

SUPER VALUE in 5 SETS.

SMD welding practice kits range in difficulty from simple to complex, with a high-stakes competition for SMD welding skills.

Expertise, finish this set, require a specific professional background and hands-on training.

Good components, a double-sided spray-tin FR-4 circuit board that is easy to solder and resists oxidation, all help make a project successful.

Super quantity components: over twenty distinct types of electronic components are among the many varieties of components.

546 components and 1255 solder joints are present.

VERY GOOD SUPPORT: Component list, circuit diagram, explanation of the working principle, and completed product diagram are included.

If you have any issues, please get in touch with us.

Znnam PCB-GLX-RITE compatible with the Hayward GLX-PCB-RITE, the GLX-PCB-RITE Control Board, the Aqua Rite Goldline GLX-PCB-RITE Circuit Board, and the Hayward Circuit Board

Price: $139.99

System compatibility [GLX-PCB-RITE]: Hayward Goldline and Aqua Rite control boards, including AQR, AQR3, AQR9, AQR15, and Hayward Goldline AquaRite T-Cell-15, are compatible with this device.

Please do not hesitate to contact our customer support with any inquiries you may have regarding compatible systems.

[Incompatible system]: The GLX-PCB-RITE is incompatible with multiple systems, including T-CELL-3, T-CELL-5, and T-CELL-9 salt cells; AquaLink control systems; AquaTrol salt production systems; AquaLogic, ProLogic, and AquaPlus systems.

[Updating this version]The Hayward Goldline or Hayward Aqua Rite control boards' software versions are compatible with the V1.59 software version of our GLX-PCB-RITE main control board.

[Appropriate for common voltages]: The GLX-PCB-RITE circuit board can be utilized for various voltages often seen in 110V or 220V by relocating the jumpers.

[Excellent after-sales service]: Please get in touch with us if you have any concerns about the GLX-PCB-RITE that you bought from us.

A member of our customer support staff will get back to you with an answer to your queries in a matter of hours.

Aumzong Main Circuit Board GLX-PCB-RITE, Hayward Goldline AquaRite Salt Chlorination Systems Printed Control Board (PCB) with Optoelectronic Coupling Power Outage Protection

Price: $99.99
how to test pcb board with a multimeter

【Main PCB board for Hayward AquaRite GLX-PCB-RITE: Aftermarket Part No.

Fitment: Compatible with Hayward AquaRite (AQR, AQR3, AQR9, AQR15), Goldline AquaRite, SwimPure Plus, and SmartPure Plus.

Blue Essence Systems, Mineral Springs, SwimPure, AquaRite XL, NatureSoft, and SmartPure.

【Assemblable】T-Cell-3, T-Cell-5, T-Cell-9, and T-Cell-15 can all be programmed into the circuit board of the Hayward Goldline AquaRite Salt Chlorination Systems.

Note: The PCB board utilized in the Hayward AquaRite model is not compatible with the AquaRite Pro or AquaTrol variants.

【Assurance of Security】With photoelectric coupling power outage prevention built into the GLX-PCB-RITE circuit board, you may avoid electric shock, efficiently enhance the performance of your salt chlorine generator, and have a safe and secure atmosphere all at once.

9 customizable Flexible PCB vs Rigid PCB in 2024

2024 High-performance wholesale Flexible PCB Supplier